Safety Certificates & Test Results

3D wall panels (interior) panels are made from Australian made 18mm (25mm or 32mm depending on the design) E0 moisture resistant (MR) medium density fibreboard (MDF) with a white melamine back and a raw face, ready for painting (by yourself or us).

We use Laminex® Lamiwood E0 from their Greenfirst™ range or Borg’s E0 Customwood which is produced to meet Australian Standard AS/NZS 1859.2:2004 – Fibreboard, and is also independently tested and accredited by the Engineered Wood Products Association of Australia (EWPAA). Borg’s Customwood is manufactured from managed and renewable plantation pine and is AFS chain of custody certified. Customwood has also achieved AS 4707:2006 Chain-of-Custody certification to the Australian Forestry Standard (AFS / 01-31-145).

Borg’s Formaldehyde emissions meet the E1 standard of <1.0 mg/L when tested in accordance with AS/NZS 4266.16:2004 – test method 16.

Borg’s Green Star environmental ratings – both E1 and E0 Customwood are eligible to earn points under the Indoor Environment Quality section of the Green Star Office Interiors program.